Grain Systems Tanks PNEG-1460 - Manual (Page 25)

6. Sidewall Assembly
PNEG-1460 6', 7' and 9' Bulk Feed Tank BFT Series and GHT Series 25
IMPORTANT: Begin bolting in the center of sheets when connecting sidewall rings to one another.
When bolting sidewall rings to one another, always begin bolting in the center of the sheet and work toward
the outside edges (horizontal seams). This allows the sidewall to draw up evenly.
Figure 6F Sidewall Assembly
It is easier to add more sidewall sheets with the tank on its side. It can be rolled easily from side-to-side
to allow the bolts and nuts to be put in the proper holes. NOTE: The roof must be assembled on the first
ring before rolling it over to its side.