EVS INSIO Version 1.1 - October 2010 User's Manual - Manual (Page 94)

INSIO Version 1.1 – User Manual
EVS Broadcast Equipment – October 2010
Issue 1.1.B
85
5.5.2 H
OW TO
A
SSIGN
M
ETADATA FROM THE
R
ECORD
T
AB
To assign metadata prior to the recording of a take, proceed as follows:
1. Open the Record tab and the Metadata tab.
Only the metadata fields selected in Setup > User > Metadata are shown.
No metadata value is displayed. The default values for Take Rating and
Take Acceptance are selected and seen as green background buttons.
2. You can enter metadata values for the current take in the free text metadata
fields at this point in time or later on.
3. Tap the Start/In button to start the recording.
The project-related fields are automatically filled in.
4. Tap a Take Rating button if you want to. This step may be done later.
5. If you want to, flag a take as accepted or not by tapping the corresponding
Take Acceptance button. This step may be done later.
6. Tap the Stop/Out button to stop the recording of the current take.
Timecode information is automatically displayed.