EVS INSIO Version 1.1 - October 2010 User's Manual - Manual (Page 8)

INSIO Version 1.1 – User Manual
EVS Broadcast Equipment – October 2010
Issue 1.1.B
VII
Section Description
simultaneously from these points. (Synchronize the Playback of
Clips on a Temporary Cue Point)
Metadata
3.4, 5.2.2,
5.5.1
Two types of metadata can be used: fixed metadata linked to the
take identification within the project and free text metadata. Take
Rating and Take Acceptance can be defined and are considered
as take metadata.
A Metadata tab is now available from the Record/Review window.
3.5, 5.5 Timecode information is displayed in the Metadata tab. The
position of the timecode fields can be set in Setup – System –
General.
0, 6.2.2 The Take Rating level and Tale Acceptance status are displayed
in the Clip List tabs and a new filter is available from the Clip
List tabs to filter takes on their Take Rating and Tale Acceptance
status.
Transfer
3.3.4 Transfer destinations are configured through the Destination
Configuration tab and some of them are selected through the
Selection Destination tab.
3.3.4, 6.1 Possibility to transfer the metadata files associated to MXF
OPAtom files.
3.7.3 Avid AAF and Interplay parameters are defined from the Setup –
System - XTAccess tab.
3.3.4, 6.1 Possibility to transfer the metadata files associated to FCP QT
files.
3.7.4 FCP destinations are defined from the Setup – System -
XTAccess tab.
3.3.4 Possibility to transfer files in folders created based on a dynamic
parameter.
6.3.2, 6.5.4 Possibility to select another transfer destination than those
selected in the Setup to transfer files.
6.2.1 The expanded Transfer Status window displays the metadata
destination for each transferred file.