EVS INSIO Version 1.1 - October 2010 User's Manual - Manual (Page 77)

Issue 1.1.B INSIO Version 1.1 – User Manual
EVS Broadcast Equipment – October 2010
68
L
IST OF
S
ERVER
P
LAYER
C
HANNELS
The list of server player channels displays the channels from the EVS server
selected in Setup > User > Predefined Configurations > Review Setup.
C
LIP
R
EVIEW
B
UTTONS
A series of buttons allows the manual loading of clips, the definition of player
channels presets to quickly load clips onto, or the selection of the video screen
display between single screen, dual split screen or quad split screen modes.
C
LIP
T
RANSPORT
, E
DIT AND
T
RANSFER
F
UNCTIONS
This area provides the functions required to play a clip and move within the
material. A jog wheel allows you to move through the loaded media in three
different modes. Buttons used for clip editing and transfer are available as well.
It also contains time information fields:
TC IN field : displays the IN point timecode of the clip being reviewed.
Duration field : displays the time interval between the IN and OUT points, i.e.
duration of the clip being reviewed.
TC OUT field : displays the OUT point timecode of the clip being reviewed.
TC Current : when the clip is being played, displays the current timecode position.
This field can also be used to enter a timecode value to jump to.
5.4.3 L
OADING
M
EDIA
To review a recorded clip, you need to load it on a player channel.
Player channels can be
• Server player channels from the EVS servers present on the network. Clips will
then be viewed on the SDI output display.
• Software Player channels, from the Video Players. Clips will then be viewed on
the Software Player display.
A clip can be loaded just after its recording from the Record tab, or, later on, from
the Left Clip List tab. The operation can be performed manually or automatically.