EVS INSIO Version 1.1 - October 2010 User's Manual - Manual (Page 101)

Issue 1.1.B INSIO Version 1.1 – User Manual
EVS Broadcast Equipment – October 2010
92
Column Header Description
Setup > User > Predefined Configurations. Refer to
section ‘Format, Name & Destination Tab’ on page 17.
% Complete Percentage of completion for the transfer of each clip.
Current TC In stream mode, timecode corresponding to the progress
status of the transfer.
Video to Transfer Estimated remaining time to complete each transfer job.
Status Status of the transfer job for each clip: queued,
processing, error, cancelled or done.
Transfer Job Status Buttons
The different buttons available on the right of the expanded Transfer Status
window are or are not active, depending on the transfer tab which is displayed.
See All the Transfers button: in addition to the transfers from the current
recording session, displays transfers still pending from a previous
recording session. This button is available only from the Record / Review
window.
See the Transfers from Current Session button: after the See All the
Transfers button has previously been activated, this one only displays
transfers from the current recording session.
Retry Transfer button: re-starts the selected transfer job which had
transfer error status.
Highest Priority button: moves the selected transfer job to the first place
in the queue.
Higher Priority button: moves the selected transfer job to the previous
place in the queue.
Lower Priority button: moves the selected transfer job to the next place
in the queue.
Lowest Priority button: moves the selected transfer job to the last place
in the queue.
Cancel Request button: cancels the selected transfer job, if not yet done.
Hide button: hides the transfer job status selected in the Done tab.
For All Transfers button: allows the Retry, Cancel or Hide actions to be
performed for all the jobs displayed in the selected tab. When activated,
the background color turns red and the Retry Transfer button, the
Cancel Request button and the Hide button are surrounded by a red line.