How to group cameras, Unused cameras – EVS INSIO Version 1.1 - October 2010 User's Manual User Manual

Page 34

INSIO Version 1.1 – User Manual

EVS Broadcast Equipment – October 2010

Issue 1.1.B

How to Group Cameras

When many cameras are used, it may be interesting to display them as groups of
cameras in the Record window, e.g. all the cameras dedicated to audience. To do
so, proceed as follows:

Tap the Group button.

A dialog box opens:

Enter a name for the group, as it will appear in the Record window, and tap

or Enter.

The group line is displayed in the cameras list.

Organize your cameras and/or groups by

•

tapping the

button to move the camera or group to the next line

•

tapping the

button to move the camera or group to the previous line

Note that the camera name needs to be indented from the group name to be
included within the group.

Move the cameras that you do not want to use under the Unused group.

Unused cameras

When you are sure that you will not use some of the cameras, move them in the

Unused group by tapping the

button. So, they will not be available in the

Record window to record take.
To remove the recorder channels from a server from the list of cameras displayed
on the Setup window, place all the channels from this server in the Unused group.

Then, tap the

button.

To remove a group name, it must be free of camera. Then, tap the

button.