EVS INSIO Version 1.1 - October 2010 User's Manual - Manual (Page 31)

Issue 1.1.B INSIO Version 1.1 – User Manual
EVS Broadcast Equipment – October 2010
22
Select one of the parameters from the Available Items field and tap . It is
then added to the Destination field.
Example:
In case the %SCENE option is selected, a folder with the scene name will be
created when a transfer is done and the corresponding takes will be saved inside
their corresponding folder.
D
ESTINATION
S
ELECTION
T
AB
This tab is used to select up to two transfer destinations, defined in the Configure
Destinations tab, that you want to use to transfer your clips to.
Allow Destination Change via Transfer Button
When selected, this option allows the users to change the transfer destination
from the Transfer button. Refer to section 6.3.2 ‘Transfer Destinations’ on page
94.
Destination – Use - Destination Config
Choose to use up to two destinations to transfer files by selecting the
corresponding checkboxes in the Use column.
Then, for Destination and/or Destination2, the Destination Config column lists all
the available transfer destinations configured in the Configure Destination tab.
Refer to section ‘Configure Destinations Tab’ on page 17. One of them can be
chosen by selecting the Destination Config field and then by viewing the list with
the drop-down arrow which will appear.