EVS INSIO Version 1.1 - October 2010 User's Manual - Manual (Page 72)

INSIO Version 1.1 – User Manual
EVS Broadcast Equipment – October 2010
Issue 1.1.B
63
Note
If the Auto Transfer mode has been activated, the recorded clips are
automatically transferred to the transfer destination defined in Setup >
User > Predefined Configurations as soon as they have been saved.
Otherwise, refer to section 6.5 ‘Manual Transfer’ on page 95 for later
transfer operation.
H
OW TO
A
BORT THE
R
ECORDING OF A
T
AKE
You can decide not to keep any clip from a take being recorded at two different
times:
• the take recording has not yet been stopped when something wrong happens:
tap the Abort Clip button to abort the recording and to delete the clips from
the current take.
OR
• the recording of the take has been stopped with the Stop/Out button but not
yet saved with the Save button or by the Auto Save mode, and you then decide
not to keep the take:
tap the Abort Clip button to delete the clips from the current take.
In both cases, the Start/In button becomes available again, the take number does
not increase and the clip names are removed from the list of cameras.
Note
When the Auto Save function is activated, you will only be allowed to
abort clip before tapping the Stop/Out button.