EVS INSIO Version 1.1 - October 2010 User's Manual - Manual (Page 58)

INSIO Version 1.1 – User Manual
EVS Broadcast Equipment – October 2010
Issue 1.1.B
49
4.3.3 H
OW TO
A
DD A
P
ROGRAM
/ E
PISODE
To define a program/episode for a project, proceed as follows:
1.
Tap the Add a Program/Episode button.
The Edit Episode/Program window is displayed and the settings applicable
to the project for the active mode (Setup > User > General) and the
configuration (Setup > User > Predefined Configurations) are displayed.
The project name is displayed in the Project/Production field but cannot be
edited.
2. Enter a name for the episode/program in the Episode/Program Name field.
3. If you want to apply Active Mode setting specific to this new episode, open
the Active Mode tab and modify the selected options. Refer to section 3.2
‘User General Settings on page 10 for a detailed explanation of the setting.
4. Select the configuration for your episode: open the Configuration tab where
you can
• select an existing configuration from the Configurations list,
• add a new configuration with the Add New Configuration button
• copy and edit the selected configuration by tapping the Copy Current
Configuration and Edit button
.
Refer to section 3.3 ‘Predefined Configurations Settings’ on page 12 for a
detailed explanation of the options.