EVS INSIO Version 1.1 - October 2010 User's Manual - Manual (Page 25)

Issue 1.1.B INSIO Version 1.1 – User Manual
EVS Broadcast Equipment – October 2010
16
Clip Display Name
The clip name format is user-defined and can be modified as described in section
‘How to Modify the Clip Display Name Format String’ on page 16.
The user can reset the default filename by tapping the Reset button .
How to Modify the Clip Display Name Format String
To modify this default name format string, proceed as follows:
1. To add an information type specified in the Available Items list, select the
item in the drop-down list and tap the Add button to add the selected
item at the end of the filename string.
Available Items Meaning
%CLIP_LOUTH_ID Clip Louth ID on the Server
%PROJECT_NAME Project Name
%EPISODE_NAME Episode Name
%SCENE_NAME Scene Name
%TAKE_NO Take Number
%CHANNEL Recorder Channel
%CHANNEL_NAME Recorder Channel Name as
configured in the Record Setup tab.
%TCIN Timecode IN
%TCOUT Timecode OUT
%DEST_NAME1 Transfer Destination Path Name 1
%DEST_NAME2 Transfer Destination Path Name 2
2. In the Full Name field, delete the part of the string you do not want to keep
in the filename, if any.
3. To add a generic text in the Full Name string, type the text in the field.
Timecode Display
This setting allows you to display NTSC timecode as Drop Frame or Non Drop
Frame.