EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 94)

Setting Name Basic Advanced
Technical
Setup
SD OUT settings X
HD OUT settings X
3.4.2. Channels
Base Settings
User Interface
The base settings allow defining the main characteristics of a configuration as regards
play and record channels.
Warning
Some base settings (Inputs, Outputs Base config.) require an application reboot
(ALT+Q from the operational windows) for changes to be taken into account.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Channels tab, in the advanced display mode
on page 1 on the server- and web-based interfaces
• in the Technical menu of the Remote Control Panel (T2.X)
The following screenshot highlights the Base settings, defined on page 1 of the Channels
tab in the server-based application:
86 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013