EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 117)

Audio Output Settings
Introduction
The audio output settings for audio allow users to do the following:
• Map the audio mono channels of the material stored on the EVS server to an output
mono channel of a play channel.
• Specify the audio gain to be applied to each output mono channel.
• Mute an output mono channel.
This can be defined for the three audio types: embedded audio, as well as digital and
analog audio, if the corresponding connectors are available on the hardware configuration.
User Interface
The following screenshots show the default audio channel assignment for the three audio
types in a configuration with 8 mono channels, 16 digital audio connectors, and 8 analog
audio connectors.
See section "Default Mapping for Audio Inputs and Outputs" on page 111 for a full
overview on the default mono channel assignment in the various supported
configurations.
CONFIGURATION MANUAL XT2 Server 11.02
3. Multicam Configuration 109