EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 182)

Clip post-roll
Description When the post-roll function is enabled from the secondary clip
menu, the clip will play through its OUT point for the duration
defined by the Clip post-roll parameter.
This is also valid inside record trains if the Record Train OUTs
parameter is set to 'Freeze'.
Values From 00s00fr to 30s00fr
Default value 02s00fr
Mark cue point
Description Specifies how the cue point timecode will be memorized.
Values Two values are possible for this parameter:
• Live:
Memorizes cue points based on the timecode of the LIVE
input.
• Playback:
Memorizes cue points based on the timecode of the field
loaded on the main play channel.
Default value Live
Preroll
Description Preroll duration used when recalling a cue point.
Values From 0s01fr to 5s00fr.
Default value 0s05fr
174 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013