EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 132)

SD OUT Encoding
Description Enables/disables the encoding of the SMPTE334M data
present on the HD output on the SD downconverted output on
each play channel. See section "SMPTE 334 Data Encoding
on Downconverted Output" on page 124 for more information.
Values Yes / No (default)
SMPTE 334 Data Encoding on Downconverted Output
For the downconverted output, one SMPTE 334M packet is encoded per line starting from
the second line after the line specified for the switching line. In other words, the maximum
number of packets per field is as follows:
• 8 packets per field in 525i (lines 12-19 and 275-282)
• 15 packets per field in 625i (lines 8-22 and 321-335)
The limitations are:
• The data are re-encoded in the same order as they were in HD, but not necessarily on
the same lines.
• If VITC is inserted in the downconverted output, no SMPTE 334M data will be inserted
on the lines carrying the VITC.
124 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013