EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 63)

3.2. Supported Configurations
3.2.1. General Information on Supported
Configurations
Overview on Supported Configuration Types
An XT2 server, equipped with COHX boards, supports the following configurations types:
• standard SD/HD configurations
• SLSM SD/HD configurations
• 3D/1080p configurations
Note
The feature 'Mix on one channel' for play channels is not available.
Number of Record and Play Channels
The number of record and play channels for a given configuration is defined in the
Channels tab, in the Base settings. See section "Base Settings" on page 86.
The number of play and record channels available may differ depending on the chassis
and on the configurations running on the XT2 server:
• Mutlicam LSM mode, when the EVS server is controlled by the Remote Panel
• Spotbox mode, when the EVS server is controlled by industry-standard protocols
such as Sony BVW75, VDCP, Odetics, DD35, EVS’ AVSP, IPDP, EditRec or LinX
API.
The following table shows the minimum and maximum number of channels that can be
operated in both modes:
6U 4U
LSM Spotbox LSM Spotbox
Max. # channels 6 6 4 4
Min. # REC 1 0 1 0
Max. # REC 6 6 3 4
Min. # PLAY 1 0 1 0
Max. # PLAY 5 6 3 4
Note
Based on the above-mentioned limitations, some configurations described in the
following sections are only available in Server or Spotbox mode.
CONFIGURATION MANUAL XT2 Server 11.02
3. Multicam Configuration 55