EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 204)

Recall clip toggle
Description Enables/disables the selection of the camera of a clip through
the Function keys: Pressing several times the F_ key browses
to CAM A, CAM B, CAM C, CAM D, CAM E and CAM F.
Values Yes / No
Default value Yes
Record key
Description Changes the function of the RECORD key on the Remote
Panel, as described below.
Values The following values are possible:
• Start REC+Live:
Pressing the RECORD key starts the record process and
switches to LIVE mode.
• Live:
Pressing the RECORD key only switches to last recorded
picture, but the record is not restarted if it has been
previously stopped by the operator.
Default value Start REC+Live
Pointing device
Description Specifies the pointing device connected to the EVS server, and
initializes it.
If the tablet is not properly calibrated, this function will re-
initialize it.
If you use the touch screen, it must always be connected to
RS422 port #6 of the server, and defined as such in the
Channels tab, Port settings.
Values Tablet / Touch Screen
Default value Tablet
196 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013