EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 35)

Supported Formats
The supported date format is DD-MM-YYYY, as shown in the example below:
• 15-03-2011 for March 15, 2011
The supported time format is hh:mm:ss, as shown in the example below
• 22:58:00 for 22 h 58 min 00 sec (24-hour display)
A warning message will inform you if the format you try to use is not valid.
How to Set the System Date and Time
To set up the system date and time from the Multicam Setup window, proceed as follows:
1. In the Multicam Setup window, press T to call the System date and time command.
The following window opens:
2. In this window, type:
◦ the date in the DD/MM/YYYY format
◦ the time in the hh:mm:ss format (24-hour display)
using TAB to move from one field to the other.
3. Press ENTER to apply the changes to the system date and time.
The date and time you have entered here will automatically be taken into account when
you launch a configuration.
CONFIGURATION MANUAL XT2 Server 11.02
2. Multicam Setup 27