EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 129)

UserBits
Description Enables/disables the insertion of the user bits in the HD output.
The values specified for the HAnc LTC and HAnc VITC fields
have to be the same.
When TC0 is selected in the HAnc LTC and HAnc VITC field,
the user bits values will also remain static and fixed to
00:00:00:00 whatever the selected value.
Values Yes (default) / No
SD OUT (in HD and SD)
D-VITC
Description Enables/disables the insertion of the embedded timecode (D-
VITC) in the SD output.
Values The values specified for the D-VITC field can be as follows:
• No No new timecode inserted in the output.
• In (default)
Same timecode as in the input inserted in the
output.
• LTC
Timecode from the LTC table inserted in the
output.
• USER User-defined timecode inserted in the output.
• TC 0
All D-VITC timecodes generated in the video
signal coming out of the given PGM will
remain static and fixed to 00:00:00:00.
Lines
Description Lines on which the specified timecode must be written on the
loop of the input.
Values From 06-08 to 20-22
Default Values • 14-16 in NTSC
• 19-21 in PAL
UserBits
Description Enables/disables the insertion of the user bits in the SD
output.
When TC0 is selected for the D-VITC field, the user bits
values will also remain static and fixed to 00:00:00:00
whatever the selected value.
Values Yes (default) / No
CONFIGURATION MANUAL XT2 Server 11.02
3. Multicam Configuration 121