EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 18)

Configuration Lines
In the Configuration Lines area, a configuration line is highlighted when it is selected.
The main commands for configuration line management are presented below:
Command description Command key
Moving up in the list of configuration lines UP ARROW
Moving down in the list of configuration lines DOWN ARROW
Starting the server with a given configuration line ENTER on selected line.
Entering the Configuration window to edit the settings
related to a selected line F8
Renaming a configuration line CTRL + F1
Deleting a configuration line CTRL + DELETE
See section "Configuration Lines" on page 11 for more commands on configuration lines.
Tools Menu
Command description Command key
Selecting a tool command Pressing the shortcut key
(between brackets in the
command name)
Calling a tool command ENTER on the selected
command
In the Web-Based Interface
Note
To be sure that changes have been taken into account in the web-based
interface, refresh regularly the page by clicking the Refresh button in the
status bar.
Configuration Lines
Command description Command icon
Renaming the configuration line
Entering the Configuration window to edit the settings related the
configuration line
Deleting the configuration line
Starting the server with the corresponding configuration line
10 2. Multicam Setup
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013