EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 64)

Channel Assignment
The following general principles apply to all configurations, and are valid for all EVS
servers equipped with COHX boards:
• The record channels (IN connectors) are always assigned from the right to the left.
• The play channels (OUT connectors) are always assigned from the left to the right.
Clip and Record Train Compatibility on XT2 Servers
• Clips are compatible across all Multicam configurations including Super LSM.
• Record trains are also compatible as long as the number of record channels (cameras)
is not increased in LSM mode.
Example
◦ SuperLSM ® 2CAM (Fx): Record trains are lost.
◦ 4CAM (Fx) ® 3CAM (Cut): Record trains are kept.
• Record trains are always kept in Spotbox mode (all modes except LSM), even when
the number of record trains is increased.
56 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013