EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 137)

Warning
Changes to the Gigabit settings require an application reboot (ALT+Q from the
operational windows) to be applied.
User Interface
The Gigabit IP Configuration settings are available:
• in the Multicam Configuration window, Network tab, in the basic and advanced
display modes on page 1 in the server-, and web-based interface.
• in the Technical menu of the Remote Control Panel (T3.X).
The following screenshot highlights the Gigabit IP Configuration settings, defined on page
1 of the Network tab in the server-based application:
IP Address (Port 1/Port 2)
Description IP address to connect to the port1/port2 of the Gigabit Ethernet
connection on the EVS server.
Values The IP addresses 0.0.0.0 and 255.255.255.255 are not
allowed.
Subnet Mask (Port 1/Port 2)
Description Range of logical addresses within the address space assigned
to the Gigabit Ethernet connection.
The IP addresses of both GigE ports must belong to different
subnet masks. Otherwise, Multicam would return an error
message.
CONFIGURATION MANUAL XT2 Server 11.02
3. Multicam Configuration 129