EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 176)

The following screenshot presents page 1 of the Network tab in the server-based
application, where the OSD settings are available, and highlights the OSD settings area:
Cue number on OSD
Description Enables / disables the display of the cue point number on the
OSD of the output monitors when a cue point is recalled inside
a record train.
Values Yes (default) / No
OSD on outputs
Description Enables / disables the OSD on the play channels.
Values Yes (default) / No
OSD on inputs
Description Enables / disables the OSD on the record channels.
Values Yes (default) / No
Background
Description Applies a dark gray background to the OSD display.
Values Yes / No (default)
168 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013