EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 192)

3.9.7. Protection Settings
User Interface
The Protection settings aim at protecting clips stored on the EVS server from deletion.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Operation tab, in the basic display mode:
◦ on page 3 on the server-based application
◦ on page 1 on the web-based interface
• in the Operational setup menu of the Remote Control Panel (5.1)
The following screenshot presents page 3 of the Operation tab in the server-based
application, where the Protection settings are available, and highlights the Protection
settings area:
Protect pages
Description Specifies the pages on which the clips stored are protected
from accidental deletion.
The clips stored on these pages are also protected when using
the Clear All Clips (F7) function from the main menu of the
Remote Panel.
See section "Navigating and Editing in the Multicam
Configuration Window" on page 49 for more information on how
to enable pages.
Values Page 1 to 10 (=0). Several pages can be selected.
Warning
When the option Clear Video Disks is selected in the Multicam Setup window
of the server-based application, all clips are deleted, including the protected
ones.
184 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013