EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 218)

Glossary
G
GPI
Abbreviation for General Purpose Interface. This refers to a device used as an
communication interface with the EVS server. It has digital lines which may be used for
input, output, or both, depending on the function.
H
Hypermotion camera
These are cameras that record at a frame rate much higher than real time. The content
recorded at high frame rate on a memory block of the camera buffer is ingested into the
EVS server through a single record channel when the operator initiates a play command
on the camera. Hypermotion cameras can be controlled by an LSM Remote Panel.
M
Multicam Configuration window
Window in the server-based and web-based Multicam Setup application from where you
can define all configuration parameters.
Multicam Setup application
Term used to refer equally to the server-based or web-based user interface used to set up
and configure the EVS servers
Multicam Setup window
Initial Window in the server-based and web-based Multicam Setup application, that is
displayed when the EVS server is not running a given configuration yet. It gives access to
the configuration lines defined on the EVS server and to the commonly used maintenance
tools.
O
Operational Setup menu
Menu accessible on the Remote Panel using the SHIFT+D keys form the main menu. It
allows users to define operational parameters.
OSD
Abbreviation for on-screen display.
S
SDTI network
EVS proprietary network that allows users to view and share the content of
interconnected EVS video servers. 'XNet network' is used as synonym for 'SDTI
network'.
210 Glossary
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013