EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 165)

3.8.2. GPI Settings
User Interface
The GPI Settings allow specifying the settings related to the GPI inputs and outputs
features.
These fields are available in the following interfaces:
• in the Multicam Configuration window, GPI tab
• in the Technical menu of the Remote Control Panel (T6.X)
The following screenshot presents the settings page of the GPI tab in the server-based
application and highlights the GPI Settings area.
Note
If the TTL GPIs set as GPIs parameter is set to In, then the display looks like
the illustration above with 8 GPIs IN and 4 GPIs OUT lines.
If it is set to Out, then the display is reorganized to expose 4 GPIs IN and 8
GPIs OUT lines.
GPI Types and Functions
There are 3 types of GPIs available to be used on the servers:
• The input lines 1 to 4 are opto-isolated inputs.
• The output lines 1 to 4 are relay outputs.
• The GPIs TTL lines can be configured as 4 TTL inputs or 4 TTL outputs, in both cases
numbered from 5 to 8.
According to the protocol you are using, the following functions are available and can be
assigned to the GPIs lines as described hereunder in the Function parameter.
• AVSP: Play, Stop, Still, Recue, GotoClipIN, GotoClipOUT, Next, Skip.
• Sony: Play, Pause, Recue, Previous, Next, Skip.
CONFIGURATION MANUAL XT2 Server 11.02
3. Multicam Configuration 157