EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 44)

How to Remove a License Code
You can remove a license code from the server-based application. Proceed as follows:
1. Press the UP ARROW and DOWN ARROW keys to move inside the options list and
select the option to be removed.
2. When the option is selected (highlighted in white), press simultaneously CTRL+
DELETE on the keyboard.
3. Confirm the deletion of the option with ENTER.
2.5. Server Maintenance
2.5.1. Chapter Contents
The table below presents the topics of this section and shows whether the described
features are available from the web-based interface and/or from the server-based
interface.
Commands Page Server-Based Web-Based
"Rebooting the EVS Server" 2.5.2 Yes No
"Hardware Check" 2.5.3 Yes No
"Clearing Video Disks" 2.5.4 Yes No
"Calibrating a Touch Screen" 2.5.5 Yes No
"Importing and Exporting Keyword Files" 2.5.6 Yes No
"Exporting Log Files" 2.5.7 Yes No
2.5.2. Rebooting the EVS Server
To reboot the EVS server is not running in a given configuration, press B from the
Multicam Setup window, then RIGHT ARROW and ENTER to validate the action.
To reboot the EVS server when it is running in a given configuration, press ALT+Q when
you are in the Clip or Playlist page, then press ENTER to confirm the action.
36 2. Multicam Setup
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013