EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 187)

Audio effect duration
Availability This setting is only available if the license code 112 is valid.
This setting is only available if the Audio locked to video
setting is set to 'No'.
Description Sets the duration of the audio transition effect when:
• the Advanced Audio Editing setting is enabled.
• the Audio locked to video setting is set to 'No'.
The specified value is used as default value in Playlist Edit
mode.
If the Advanced Audio Editing is disabled, this setting is not
relevant since the video and audio transitions will always have
the same duration, based on the Video Effect Duration.
Values 0s00fr to 20s00fr
Default value 0s00fr
Wipe type
Description Specifies the vertical wipe effects from Left to Right or from
Right to Left.
Values Vert. L>R / Vert. R>L
Default value Vert. L > R
Default playlist speed
Description Defines the default speed used to play clips in a playlist.
Values The following values are possible Unknown, and from 0% to
100%:
• Unknown means that the speed of the previous clip in the
playlist will be used as a reference for the current clip.
• 0% will force the playlist to pause at the end of each clip.
• 1% to 100% will apply the specified speed as default
speed for playlist elements.
Default value Unknown
Insert in playlist
Description Specifies if the clips add to a playlist are insert before or after
the active clip in the playlist.
Values After / Before
Default value Before
CONFIGURATION MANUAL XT2 Server 11.02
3. Multicam Configuration 179