EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 144)

Genlock Error
Description Enables or disables the Genlock information display on the
output monitor.
If the Genlock reference is not correct, the !GkV message
appears on the output monitor.
Values Yes (default) / No
Disk Error
Description Enables or disables the disk error information display on the
output monitor.
As the server is equipped with a RAID disk array, the operation
can continue seamlessly even with 1 faulty disk. If 1 disk is
disconnected during operation, the !Raid message appears on
all output monitors, and another message appears when the
operator shuts down the application, to invite him to replace the
disk and rebuild the RAID array.
Please, refer to the Technical Reference manual for details on
the RAID system and its maintenance.
Values Yes (default) / No
Network error
Description Enables or disables the network error information display on
the output monitor.
If there is an problem with the network connection, the !Net
message appears on the output monitor. When the network is
available again, the system will try to reconnect and the →Net
message appears on the output monitor.
Values Yes (default) / No
Clip name
Description Specifies how the clip name is displayed.
Values VarID / Name
Default Name
136 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013