EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 203)

Lever engage mode
Description Specifies how the playback speed varies depending on the
position of the lever.
Values The following values are possible:
• Direct mode:
The lever will engage directly when moved, resulting in a
speed jump to the desired speed determined by the lever
arm position.
• Current speed mode:
The lever will only engage when it reaches the current
playback speed, whereas a move of the lever arm in the
opposite direction of the current speed will result in a direct
speed change.
Default value Direct
Second lever range
Context The lever can be used in normal mode to play back clips at
slow motion speed from 0 to 100%. A secondary range is
available to playback material at other speed ranges.
To gain access to the secondary speed from the remote
controller, press SHIFT + LEVER/TAKE.
The second lever range is also available when editing the
speed of playlist clips.
Description Specifies the secondary speed range on the Remote Panel.
Values The following values are possible:
• -100% → +100%
• 0 → +200%
• -200% → +200%
• 0 → +400%
• -400% → +400%
Default value -100% → +100%
CONFIGURATION MANUAL XT2 Server 11.02
3. Multicam Configuration 195