EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 177)

3.9.3. Audio Meters OSD Settings
User Interface
The Audio Meters OSD settings allow users to specify whether and how the audio meters
are to be displayed on the OSD.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Operation tab, in the basic display mode on
page 1 on the server- and web-based interfaces
• in the Operational menu of the Remote Control Panel (1.2)
The following screenshot presents page 1 of the Operation tab in the server-based
application, where the Audio Meters OSD settings are available, and highlights this
settings area:
Audio meters
Description Shows/hides the audio meters on the OSD.
Values Yes / No
Default value Yes
DB Adjust
Description Adjusts the value of the displayed audio meters.
Values From - 83.2 to 0.0 dB, with a variable increments (larger in low
values, and smaller with increasing values)
Default value 0.0
CONFIGURATION MANUAL XT2 Server 11.02
3. Multicam Configuration 169