EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 219)

Server-Based Multicam Setup application
Server-Based application used to set up and configure the EVS servers. The short form is
'Server-Based application' in this user manual. This is accessible from the EVS Server
itself when it has been started.
SLSM camera
Also called Supermotion cameras. These are cameras that record at a a frame rate two to
three times higher than the normal frame rate of 25 fps (PAL) or 30 fps (NTSC). The two or
three phases of the camera are ingested in parallel as separate record channels into the
EVS server.
T
Technical Setup menu
Menu accessible on the Remote Panel using the F0 key. It allows users to define
currently used configuration parameters.
W
Web-Based Multicam Setup interface
Web-Based interface used to set up and configure the EVS servers. The short form is
'web-based interface' in this manual. This is accessible from any machine (PC or server)
that is on the same network range as the EVS server. This can be accessed from a web
browser using the following URL pattern: http://xxx.xxx.xxx.xxx/cfgweb/ where the
crosses correspond to the IP address of the PC LAN of the EVS server.
CONFIGURATION MANUAL XT2 Server 11.02
Glossary 211