EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 200)

Lipsync value (ms)
Description Specifies the delay (in ms) between video and audio signals:
• A positive value means video is ahead of audio.
• A negative value means audio ahead of video.
Values The following values are possible:
• Range for PAL: from -41,458 ms to 14,708 ms → 848 to
3544 samples, 0 ms → 2838 samples
• Range for NTSC: from -34,625 to 12,125 ms → 688 to 2932
(samples), 0 ms → 2350 samples
Default value 0 ms
Note
This adjustment is done during the record process. A new Lipsync value will
apply for the next recorded pictures only.
Aux track output
Description Specifies to which audio outputs the auxiliary track of the
playlist will be played out.
Values The following values are possible:
• PRV:
The auxiliary track will use the audio outputs normally
assigned to the PRV channel. If no PRV channel is
available, the Aux Track will not be assigned to any audio
output.
• PRV&7-8/15-16:
The auxiliary track will use the audio outputs normally
assigned to the PRV channel if there is one, plus all the
audio outputs from 7-8/15-16 that have not yet been
assigned to another channel. Use this option if you need an
auxiliary track without PRV channel available.
• PGM:
The auxiliary track will use the audio outputs normally
assigned to the PGM channel.
Default value PRV
192 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013