EVS XT2 Version 11.02 - July 2013 Configuration Manual - Manual (Page 127)

User
Description Timecode type stored in the second timecode jump table (User
TC table).
Values In SD:
• LTC
• VITC
In HD:
• LTC
• HANC LTC
• HANC VITC
Primary TC
Description Timecode type that is displayed at the bottom the VGA and is
used to work with the video material stored on the given
recorder.
Usually, an LTC timecode is used to perform operations on live
events. A VITC timecode is used for video material ingested
from tapes as it is the timecode embedded in the video signal.
Values • LTC: LTC timecode, which is automatically stored in the
LTC table. It is specified in the LTC field.
• User: User-defined timecode, which is stored in the USER
TC table and specified in the User field.
OSD Display Depending on the value selected for this setting, the timecode
displayed at the bottom of the user’s OSD will have a different
color:
• If the LTC timecode is selected, the timecode color will be
white.
• If the USER timecode is selected, the timecode color will
be yellow.
Timecode Insertion Settings
User Interface
The Timecode Insertion settings allow the management of VITC or ANC timecodes
channel by channel.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Channels tab, in the advanced display mode:
◦ on page 7, 8 or 9 on the server-based application
◦ on page 1 on the web-based interface
CONFIGURATION MANUAL XT2 Server 11.02
3. Multicam Configuration 119