State-based softkeys, Options key – AASTRA 6739i User Guide EN User Manual
Page 88

Options Key
82
41-001317-05 REV01 – 06.2013
State-Based Softkeys
All of the softkeys on the 6739i are state-based except for the “None” softkey. You can use the softkey when the phone is
in the state specified for that softkey.
Pickup
Indicates the key is configured to pick up parked calls when pressed.
Your System Administrator must set configuration parameters before you can use the Pickup feature.
Last Call Return
Indicates the key is configured for “last call return” when pressed.
Call Forward
Indicates the key is configured as a Call Forward key. When pressed, the IP Phone UI displays the Call Forward
menus.
BLF/Xfer
Indicates the key is configured as a simplified BLF key and a transfer key. You can use this key to perform the BLF
function, or you can use it as a transfer key to transfer calls.
Speeddial/Xfer
Indicates the key is configured as a simplified speed dial key and a transfer key. You can use this key to perform
speed dial functions, or you can use it as a transfer key to transfer calls.
Speeddial/Conf
Indicates the key is configured as a speed dial key and a conference key. You can use this key to speed dial from
within a conference call, and add the new call directly to the conference.
Icom (Intercom)
Indicates the key is configured to be used for intercom calls.
Phone Lock
Indicates the key is configured as a phone lock key, allowing you to press this key to lock/unlock the phone.
Paging
Indicates the key is configured as a Paging key. When pressed, the phone can send Real Time Transport Protocol
(RTP) streams from a pre-configured multicast address without involving SIP signalling. You can also receive RTP
streams from pre-configured multicast addresses (can specify up to 5 addresses) using the "Paging Listen
Addresses" at the path, Basic Settings->Preferences->Group Paging RTP Settings in the Aastra Web UI. For more
information about setting this parameter, see
“Group RTP Paging (receives RTP streams)”
.
Empty
Indicates the key has no function assigned.
Key Function
Description
Softkeys
L1 John Smith 401
12 : 45pm
Mon Jan 1
John Smith
401
Home
403
404
405
406
503
Office
BLF
Park
Pickup
402
More
Softkeys
(state-based
)