AASTRA 6739i User Guide EN - Manual (Page 55)

Hard Keys
41-001317-05 REV01 – 06.2013
49
Using a Keypad Key to Configure a Speed Dial
Pressing and holding down an unprogrammed keypad key on the phone initiates the “create a speed dial” feature.
Use the following procedure to create a keypad speed dial.
Note:
The keypad key must have no preassigned function (key must be unprogrammed) in order to use the press-and-hold
feature to create a speed dial key. For more information about configuring a speed dial key, see
“Speed Dial Softkey” on
page 87 .
IP Phone UI
1. Press a keypad key for 3 seconds.
The following screen displays.
Note:
You can press the "Cancel" key at anytime during the speed dial programming to cancel and not save the speed
dial information.
2. In the “Line” field, press the or to select a line to assign to the speed dial key.
Valid values are 1 through 9.
This is the line that the phone opens to dial the number after you press the speed dial key. By default, the phone
uses Line 1.
3. Press the “Number” field. A keyboard displays.
Enter a number for the speed dial key using the displayed keyboard.
12 : 45pm
Mon Jan 1
Type
Line 1
Cancel Save
Number
Speed Dial Edit:
keypad