Options key – AASTRA 6739i User Guide EN User Manual
Page 125
Options Key
41-001317-05 REV01 – 06.2013
119
Configuring a Paging Key
IP Phone UI
1.
Press
on the phone to enter the Options List.
2.
Press the
3.
Press a
4.
In the “Type” field, press the <None> key. A screen displays with softkey keys.
5.
Press the <Paging> function key to apply to the softkey.
6.
In the "Label" field, enter a label to apply to this key.
7.
In the "Value" field, enter a multicast IP address(es) and a port number for the Paging key. When you press this
key, the phone initiates an outgoing multicast RTP session to the specified address(es) using the specified port.
(For example, 239.0.1.15:10000).
Notes:
1. When you select Paging for the “Type” field, the “Line” field is disabled.
2. If you enter more than one multicast address, separate the address by a comma.
For example, 239.0.1.15, 245.343.2.4:10000
8.
To receive RTP steams for Group Paging, you must also configure the "Paging Listen Addresses" parameter in the
Web UI at the path, Basic Settings->Preferences->Group Paging RTP Settings. For more information about setting
this parameter, see “
Group RTP Paging (receives RTP streams)
.
9.
Press <Save> to save the softkey. The softkey applies to your phone immediately and displays on your idle screen.
10.
Press the
to return to the previous menu or press the
to return to the idle screen.
Aastra Web UI
1.
Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module.
Softkeys
2.
Select from “Key 1” through “Key 55”.
3.
In the "Type" field, select Paging.
4.
In the "Label" field, enter a label to apply to this key.
5.
In the "Value" field, enter a multicast IP address(es) and a port number for the Paging key. When you press this
key, the phone initiates an outgoing multicast RTP session to the specified address(es) using the specified port.
(For example, 239.0.1.15:10000).
Notes:
1. When you select Paging for the “Type” field, the “Line” field is disabled.
2. If you enter more than one multicast address, separate the address by a comma.
For example, 239.0.1.15, 245.343.2.4:10000
6.
To receive RTP steams for Group Paging, you must also configure the "Paging Listen Addresses" parameter at the
path, Basic Settings->Preferences->Group Paging RTP Settings. For more information about setting this param-
eter, see “
Group RTP Paging (receives RTP streams)
.
Expansion Module Keys
7.
Select an expansion module key.
8.
In the "Type" field, select Paging.
9.
In the "Label" field, enter a label to apply to this key.