Paging key (sends the rtp stream), Options key – AASTRA 6739i User Guide EN User Manual
Page 124
Options Key
118
41-001317-05 REV01 – 06.2013
Using the Phone Lock Softkey
After configuring a key as a lock/unlock softkey, refer to the following procedure to use the key on the phone.
Lock the Phone
Unlock the Phone
Paging Key (Sends the RTP Stream)
You can configure a Paging key on the phone that allows you to send a Real Time Transport Protocol (RTP) stream to pre-
configured multicast address(es) without involving SIP signalling. You enter a multicast IP address(es) and a port number
for the Paging key, that when pressed, initiates an outgoing multicast RTP session. This is called Group Paging on the IP
phones.
You can also specify group paging RTP addresses that the phone listens for when receiving RTP streams. You can specify
up to 5 listening multicast addresses in the Aastra Web UI at the path, Basic Settings->Preferences->Group Paging RTP
Settings.
For more information about Group Paging and how it works, and to specify multicast addresses, see
.
Aastra Web UI
1.
Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module.
Softkeys
2.
Select from “Key 1” through “Key 55”.
3.
In the "Type" field, select Phone Lock.
Expansion Module Keys
4.
Select an expansion module key.
5.
In the "Type" field, select Phone Lock.
6.
Click Save Settings.
IP Phone UI
1.
Press the LOCK softkey. The phone locks.
The message “Phone is Locked” displays on the screen.
The LED for the softkey AND the Message Waiting Lamp illuminate steady ON.
1.
Press the UNLOCK key. The “Unlock” key has a steady ON LED.
A password prompt displays.
2.
Enter your user password and press ENTER. Default is “22222”. The phone unlocks.
The LED for the key AND the Message Waiting Lamp go OFF. The message “Phone is unlocked” briefly displays on
the screen.