AASTRA 6739i User Guide EN - Manual (Page 128)

Options Key
122
41-001317-05 REV01 – 06.2013
Empty Softkey
When you first setup your phone out of the box, the softkeys display as blank on the idle screen. These softkeys are set to
“empty” and indicate there are no softkeys configured on the phone. The “empty” function forces a blank entry on the
softkey and disables configured softkeys.
Configuring an Empty Softkey
Use the following procedures to configure an Empty softkey on your phone.
5. In the "Type" field, select None.
6. Click Save Settings.
IP Phone UI
1. Press on the phone to enter the Options List.
2. Press the key.
3. Press a key that has a configuration function. A softkey configuration screen displays.
4. In the “Type” field, press the function key. A screen displays with softkey keys.
5. Press the <Empty> function key to apply to the softkey.
6. Press <Save> to save the softkey. The softkey applies to your phone immediately and displays on your idle screen.
7. Press the to return to the previous menu or press the to return to the idle screen.
Aastra Web UI
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module.
Softkeys
2. Select from “Key 1” through “Key 55”.
3. In the "Type" field, select Empty.
4. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
5. Select an expansion module key.
6. In the "Type" field, select Empty.
7. Click Save Settings.