AASTRA BluStar 8000i BAS-Mode Administrator Guides EN - Manual (Page 99)

Routing Rules
41-001391-00 Rev 03 – 04.2012 7-5
Routing Rules
The routing rules menu allows you to configure the server’s connections with other devices, manage bandwidth between
networks, and customize call routing.
There are two types of rules that are configured on the Routing Rules page.
• General SIP routing rules
These rules match “sip:” URL patterns.
• Telephony Specific routing rules
These rules match “tel:” or “sip:…;user=phone” URL patterns.
User Interface
To add a new rule, enter the text to be matched, and the replacement text, then select Add.
To modify a rule, change the rule text, and select Save.
Because rules are order sensitive, buttons have been provided to move rules up or down. Specific rules should normally
proceed general rules.
Regular Expression Tester
A facility has been provided to test the configured set of rules. To test a set of rules, enter a test case SIP URL in the form
that it would be received by the BluStar Server. For example, enter:
sip:[email protected]
The system will highlight the matching rules for the test case. It will also display the replacement text generated by each
matching rule.
Note:
BluStar 8000i terminals and most other devices send plain “sip:” URLs, therefore normally use general rules.
Note:
The system only accepts changes to one rule at a time. Modify a rule and select [Save] before starting to edit another
rule.