beautypg.com

Time setup, Software installation and network configuration – AASTRA BluStar 8000i BAS-Mode Administrator Guides EN User Manual

Page 22

background image

Software Installation and Network Configuration

2-9

41-001391-00 Rev 03 – 04.2012

Time Setup

1.

On the BluStar Application Server Configuration menu, use the up and down arrow keys to select Time Setup, then
press Enter. The following screen displays:

2.

Press the spacebar to toggle the hardware clock setting.

Note:
Setting the hardware clock to GMT is recommended.

3.

Press the Tab key to move to the list of time zones; then use the up and down arrow keys to select the desired time zone.

4.

Press the Tab key to move to the Ok button; and press Enter or the spacebar to accept the time zone settings.
The following screen displays:

See also other documents in the category AASTRA Accessories communication: