AASTRA BluStar 8000i BAS-Mode Administrator Guides EN - Manual (Page 23)

Software Installation and Network Configuration
41-001391-00 Rev 03 – 04.2012 2-10
5. Read the information on this screen, then press Enter to continue. The following screen appears:
6. Use the Tab key to move the cursor to the field that you wish to change; then use the h, j, k, and l keys to change values.
When finished, tab to OK, then press Enter. The following screen displays:
7. Use the Tab key to move the cursor to the field that you wish to change; then use the up and down arrow keys to change
values. When finished, tab to OK, then press Enter. The display indicates that the date has been set. Press Enter to
return to the main configuration menu.
8. Continue with SSL Certificate Generation on page 2-11 .
Note:
The Date and Time configuration is only applied to the server where the operation is performed. It must be repeated
on the High Availability peer in a fail-over configuration.