ZyXEL Communications ADSL VoIP IAD with 802.11g Wireless 2602HW Series - Manual (Page 257)

Prestige 2602HW Series User’s Guide
Chapter 21 Maintenance 257
21.3 DHCP Table Screen
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the Prestige
as a DHCP server or disable it. When configured as a server, the Prestige provides the TCP/IP
configuration for the clients. If set to None, DHCP service will be disabled and you must have
another DHCP server on your LAN, or else the computer must be manually configured.
Click Maintenance, and then the DHCP Table tab. Read-only information here relates to
your DHCP status. The DHCP table shows current DHCP Client information (including IP
Address, Host Name and MAC Address) of all network clients using the DHCP server.
Status For the WAN port, this displays the port speed and duplex setting if you're using
Ethernet encapsulation and down (line is down), idle (line (ppp) idle), dial
(starting to trigger a call) and drop (dropping a call) if you're using PPPoE
encapsulation.
For a LAN port, this shows the port speed and duplex setting.
TxPkts This field displays the number of packets transmitted on this port.
RxPkts This field displays the number of packets received on this port.
Errors This field displays the number of error packets on this port.
Tx B/s This field displays the number of bytes transmitted in the last second.
Rx B/s This field displays the number of bytes received in the last second.
Up Time This field displays the elapsed time this port has been up.
Collisions This is the number of collisions on this port.
Voice Statistics The voice statistics fields apply to calls currently being made or received on a
telephone connected to one of the Prestige's phone ports.
Phone This field displays the Prestige's phone port number.
Status Status This field displays Onhook when the telephone handset is in it’s cradle
and Offhook when telephone handset is out of it’s cradle.
TxPkts This field displays a call's number of RTP (Real time Transport Protocol) packets
that have been transmitted. RTP is used to handle voice data transfer. This field
displays 0 again after the call ends.
RxPkts This field displays a call's number of RTP packets received. This field displays 0
again after the call ends.
Tx B/s This field displays a call's number of bytes of RTP traffic transmitted in the last
second. This field displays 0 again after the call ends.
Rx B/s This field displays a call's number of bytes of RTP traffic received in the last
second. This field displays 0 again after the call ends.
Talk Time This field displays a call's duration. This field displays 0 again after the call ends.
Poll Interval(s) Type the time interval for the browser to refresh system statistics.
Set Interval Click this button to apply the new poll interval you entered in the Poll Interval
field above.
Stop Click this button to halt the refreshing of the system statistics.
Table 78 System Status: Show Statistics (continued)
LABEL DESCRIPTION