ZyXEL Communications ADSL VoIP IAD with 802.11g Wireless 2602HW Series - Manual (Page 138)

Prestige 2602HW Series User’s Guide
138 Chapter 10 Voice Screens
10.3 Advanced Voice Settings Configuration
Click Voice in the navigation panel and then SIP Settings to open the SIP Settings screen.
Select a SIP account and then click Settings to display the following screen.
Table 33 SIP Settings
LABEL DESCRIPTION
SIP Account You can configure the Prestige to use multiple SIP accounts. Select one to configure
its settings on the Prestige.
Active SIP Select this check box to have the Prestige use this SIP account. Clear the check box
to have the Prestige not use this SIP account.
SIP Number Enter your SIP number in this field (use the number or text that comes before the @
symbol in a full SIP URI). You can use up to 95 ASCII characters.
SIP Local Port Use this field to configure the Prestige’s listening port for SIP. Leave this field set to
the default if you were not given a local port number for SIP.
SIP Server
Address
Type the IP address of the SIP server in this field. It doesn’t matter whether the SIP
server is a proxy, redirect or register server.
SIP Server Port Enter the SIP server’s listening port for SIP in this field. Leave this field set to the
default if your VoIP service provider did not give you a server port number for SIP.
REGISTER
Server Address
Enter the SIP register server’s address in this field.
If you were not given a register server address, then enter the address from the
SIP Server Address field again here.
REGISTER
Server Port
Enter the SIP register server’s listening port for SIP in this field.
If you were not given a register server port, then enter the port from the SIP
Server Port field again here.
SIP Service
Domain
Enter the SIP service domain name in this field (the domain name that comes after
the @ symbol in a full SIP URI). You can use up to 127 ASCII Extended set
characters.
User ID This is the user name for registering this SIP account with the SIP register server.
Type the user name exactly as it was given to you. You can use up to 95 ASCII
characters.
Password Type the password associated with the user name above. You can use up to 95
ASCII Extended set characters.
Send Caller ID Select this check box to show identification information when you make VoIP phone
calls. Clear the check box to not show identification information when you make VoIP
phone calls.
Incoming Call
apply to
Phone 1 and Phone 2 correspond to the Prestige’s physical PHONE 1 and 2 ports,
respectively. Select whether you want to receive calls for this SIP account on Phone
1, Phone 2 or both. If you select both, you will not know which SIP account a call is
coming in on.
Advanced
Settings
Click Settings to open a screen where you can configure the Prestige’s advanced
VoIP settings like SIP server settings, the RTP port range and the coding type.
Back Click Back to return to the previous screen.
Apply Click Apply to save your changes back to the Prestige.
Cancel Click Cancel to begin configuring this screen afresh.