ZyXEL Communications ADSL VoIP IAD with 802.11g Wireless 2602HW Series User Manual

Prestige 2602hw series

Text mode
Original mode

Prestige 2602HW Series

ADSL VoIP IAD with 802.11g Wireless

User’s Guide

Version 3.40

1/2005

Table of contents

Document Outline

Prestige 2602HW Series
Copyright
Federal Communications Commission (FCC) Interference Statement
Safety Warnings
ZyXEL Limited Warranty
Customer Support
Table of Contents
List of Figures
List of Tables
Preface
Introduction to DSL
Getting To Know Your Prestige
- 1.1 Introducing the Prestige
- 1.2 Prestige 2602HW-L with Lifeline
- 1.3 Features of the Prestige
- 1.4 Applications for the Prestige
- 1.5 Prestige Hardware Installation and Connection
Introducing the Web Configurator
- 2.1 Web Configurator Overview
Wizard Setup
- 3.1 Wizard Setup Introduction
- 3.2 IP Address and Subnet Mask
Password Setup
- 4.1 Password Overview
  - 4.1.1 Configuring Password
LAN Setup
- 5.1 LAN Overview
  - 5.1.1 LANs, WANs and the Prestige
- 5.2 DNS Server Address
- 5.3 DNS Server Address Assignment
- 5.4 LAN TCP/IP
- 5.5 Any IP
  - 5.5.1 How Any IP Works
- 5.6 Configuring LAN
- 5.7 Configuring Static DHCP
Wireless LAN Setup
- 6.1 Wireless LAN Introduction
- 6.2 Levels of Security
- 6.3 Data Encryption with WEP
- 6.4 Configuring Wireless LAN
- 6.5 Configuring MAC Filter
- 6.6 Network Authentication
  - 6.6.1 EAP
    - 6.6.1.1 RADIUS
    - 6.6.1.2 Types of RADIUS Messages
  - 6.6.2 EAP Authentication Overview
- 6.7 Introduction to WPA
  - 6.7.1 User Authentication
  - 6.7.2 Encryption
- 6.8 WPA-PSK Application Example
- 6.9 WPA with RADIUS Application Example
- 6.10 Security Parameters Summary
- 6.11 Wireless Client WPA Supplicants
- 6.12 Configuring 802.1x and WPA
- 6.13 Configuring Local User Authentication
- 6.14 Configuring RADIUS
WAN Setup
- 7.1 WAN Overview
- 7.2 Metric
- 7.3 PPPoE Encapsulation
- 7.4 Traffic Shaping
- 7.5 Zero Configuration Internet Access
- 7.6 Configuring WAN Setup
- 7.7 Traffic Redirect
- 7.8 Configuring WAN Backup
Network Address Translation (NAT) Screens
- 8.1 NAT Overview
- 8.2 SUA (Single User Account) Versus NAT
- 8.3 SUA Server
- 8.4 Selecting the NAT Mode
- 8.5 Configuring SUA Server
- 8.6 Configuring Address Mapping
- 8.7 Editing an Address Mapping Rule
Introduction to VoIP
- 9.1 Introduction to VoIP
- 9.2 SIP
- 9.3 SIP ALG
- 9.4 Pulse Code Modulation
- 9.5 Voice Coding
  - 9.5.1 G.711
  - 9.5.2 G.729
- 9.6 PSTN Call Setup Signaling
Voice Screens
- 10.1 Voice Screens Introduction
- 10.2 SIP Settings Configuration
- 10.3 Advanced Voice Settings Configuration
- 10.4 Quality of Service (QoS)
- 10.5 QoS Configuration
- 10.6 Phone
- 10.7 Phone Configuration
- 10.8 Speed Dial
  - 10.8.1 Peer-to-Peer Calls
- 10.9 Speed Dial Configuration
- 10.10 Lifeline (Prestige 2602HW-L)
- 10.11 Lifeline Configuration (Prestige 2602HW-L)
- 10.12 Common Phone Port Configuration
Dynamic DNS Setup
- 11.1 Dynamic DNS
  - 11.1.1 DYNDNS Wildcard
- 11.2 Configuring Dynamic DNS
Time and Date
- 12.1 Pre-defined NTP Time Servers List
- 12.2 Configuring Time and Date
Firewalls
- 13.1 Firewall Overview
- 13.2 Types of Firewalls
- 13.3 Introduction to ZyXEL’s Firewall
  - 13.3.1 Denial of Service Attacks
- 13.4 Denial of Service
  - 13.4.1 Basics
  - 13.4.2 Types of DoS Attacks
- 13.5 Stateful Inspection
- 13.6 Guidelines for Enhancing Security with Your Firewall
  - 13.6.1 Security In General
- 13.7 Packet Filtering Vs Firewall
  - 13.7.1 Packet Filtering:
    - 13.7.1.1 When To Use Filtering
  - 13.7.2 Firewall
    - 13.7.2.1 When To Use The Firewall
Firewall Configuration
- 14.1 Access Methods
- 14.2 Firewall Policies Overview
- 14.3 Rule Logic Overview
- 14.4 Connection Direction Example
- 14.5 Configuring Basic Firewall Settings
- 14.6 Rule Summary
  - 14.6.1 Configuring Firewall Rules
- 14.7 Customized Services
- 14.8 Creating/Editing A Customized Service
- 14.9 Example Firewall Rule
- 14.10 Predefined Services
- 14.11 Anti-Probing
- 14.12 DOS Thresholds
  - 14.12.1 Threshold Values
  - 14.12.2 Half-Open Sessions
    - 14.12.2.1 TCP Maximum Incomplete and Blocking Time
Content Filtering
- 15.1 Content Filtering Overview
- 15.2 Configuring Keyword Blocking
- 15.3 Configuring the Schedule
- 15.4 Configuring Trusted Computers
Introduction to IPSec
- 16.1 VPN Overview
- 16.2 IPSec Architecture
  - 16.2.1 IPSec Algorithms
  - 16.2.2 Key Management
- 16.3 Encapsulation
  - 16.3.1 Transport Mode
  - 16.3.2 Tunnel Mode
- 16.4 IPSec and NAT
VPN Screens
- 17.1 VPN/IPSec Overview
- 17.2 IPSec Algorithms
  - 17.2.1 AH (Authentication Header) Protocol
  - 17.2.2 ESP (Encapsulating Security Payload) Protocol
- 17.3 My IP Address
- 17.4 Secure Gateway Address
  - 17.4.1 Dynamic Secure Gateway Address
- 17.5 VPN Summary Screen
- 17.6 Keep Alive
- 17.7 Remote DNS Server
- 17.8 NAT Traversal
  - 17.8.1 NAT Traversal Configuration
- 17.9 ID Type and Content
  - 17.9.1 ID Type and Content Examples
- 17.10 Pre-Shared Key
- 17.11 Editing VPN Policies
- 17.12 IKE Phases
- 17.13 Configuring Advanced IKE Settings
- 17.14 Manual Key Setup
  - 17.14.1 Security Parameter Index (SPI)
- 17.15 Configuring Manual Key
- 17.16 Viewing SA Monitor
- 17.17 Configuring Global Setting
- 17.18 Telecommuter VPN/IPSec Examples
  - 17.18.1 Telecommuters Sharing One VPN Rule Example
  - 17.18.2 Telecommuters Using Unique VPN Rules Example
- 17.19 VPN and Remote Management
Remote Management Configuration
- 18.1 Remote Management Overview
- 18.2 Telnet
- 18.3 FTP
- 18.4 Web
- 18.5 Configuring Remote Management
Universal Plug-and-Play (UPnP)
- 19.1 Introducing Universal Plug and Play
- 19.2 UPnP and ZyXEL
  - 19.2.1 Configuring UPnP
- 19.3 Installing UPnP in Windows Example
- 19.4 Using UPnP in Windows XP Example
Logs Screens
- 20.1 Logs Overview
  - 20.1.1 Alerts and Logs
- 20.2 Configuring Log Settings
- 20.3 Displaying the Logs
- 20.4 SMTP Error Messages
  - 20.4.1 Example E-mail Log
Maintenance
- 21.1 Maintenance Overview
- 21.2 System Status Screen
  - 21.2.1 System Statistics
- 21.3 DHCP Table Screen
- 21.4 Any IP Table Screen
- 21.5 Wireless Screen
  - 21.5.1 Association List
- 21.6 Diagnostic Screens
  - 21.6.1 Diagnostic General Screen
  - 21.6.2 Diagnostic DSL Line Screen
- 21.7 Firmware Screen
Introducing the SMT
- 22.1 Introduction to the SMT
- 22.2 Accessing the SMT via the Console Port
- 22.3 Navigating the SMT Interface
  - 22.3.1 System Management Terminal Interface Summary
  - 22.3.2 SMT Menus Overview
- 22.4 Changing the System Password
Menu 1 General Setup
- 23.1 General Setup
- 23.2 Procedure To Configure Menu 1
  - 23.2.1 Procedure to Configure Dynamic DNS
Menu 2 WAN Backup Setup
- 24.1 Introduction to WAN Backup Setup
- 24.2 Configuring WAN Backup in Menu 2
  - 24.2.1 Traffic Redirect Setup
Menu 3 LAN Setup
- 25.1 LAN Setup
  - 25.1.1 General Ethernet Setup
- 25.2 Protocol Dependent Ethernet Setup
- 25.3 TCP/IP Ethernet Setup and DHCP
Wireless LAN Setup
- 26.1 Wireless LAN Overview
- 26.2 Wireless LAN Setup
  - 26.2.1 Wireless LAN MAC Address Filter
Internet Access
- 27.1 Internet Access Overview
- 27.2 IP Policies
- 27.3 IP Alias
- 27.4 IP Alias Setup
- 27.5 Route IP Setup
- 27.6 Internet Access Configuration
Remote Node Configuration
- 28.1 Remote Node Setup Overview
- 28.2 Remote Node Setup
- 28.3 Remote Node Network Layer Options
  - 28.3.1 My WAN Addr Sample IP Addresses
- 28.4 Remote Node Filter
- 28.5 Editing ATM Layer Options
Static Route Setup
- 29.1 IP Static Route Overview
- 29.2 Configuration
Bridging Setup
- 30.1 Bridging in General
- 30.2 Bridge Ethernet Setup
  - 30.2.1 Remote Node Bridging Setup
  - 30.2.2 Bridge Static Route Setup
Network Address Translation (NAT)
- 31.1 Using NAT
  - 31.1.1 SUA (Single User Account) Versus NAT
- 31.2 Applying NAT
- 31.3 NAT Setup
  - 31.3.1 Address Mapping Sets
- 31.4 Configuring a Server behind NAT
- 31.5 General NAT Examples
Enabling the Firewall
- 32.1 Remote Management and the Firewall
- 32.2 Access Methods
- 32.3 Enabling the Firewall
Filter Configuration
- 33.1 About Filtering
  - 33.1.1 The Filter Structure of the Prestige
- 33.2 Configuring a Filter Set for the Prestige
- 33.3 Filter Rules Summary Menus
- 33.4 Configuring a Filter Rule
  - 33.4.1 TCP/IP Filter Rule
  - 33.4.2 Generic Filter Rule
- 33.5 Filter Types and NAT
- 33.6 Example Filter
- 33.7 Applying Filters and Factory Defaults
  - 33.7.1 Ethernet Traffic
  - 33.7.2 Remote Node Filters
SNMP Configuration
- 34.1 About SNMP
- 34.2 Supported MIBs
- 34.3 SNMP Configuration
- 34.4 SNMP Traps
System Security
- 35.1 System Security
- 35.2 Creating User Accounts on the Prestige
System Information and Diagnosis
- 36.1 Overview
- 36.2 System Status
- 36.3 System Information
  - 36.3.1 System Information
  - 36.3.2 Console Port Speed
- 36.4 Log and Trace
  - 36.4.1 Viewing Error Log
  - 36.4.2 Syslog and Accounting
- 36.5 Diagnostic
Firmware and Configuration File Maintenance
- 37.1 Filename Conventions
- 37.2 Backup Configuration
- 37.3 Restore Configuration
- 37.4 Uploading Firmware and Configuration Files
System Maintenance
- 38.1 Command Interpreter Mode
- 38.2 Call Control Support
  - 38.2.1 Budget Management
- 38.3 Time and Date Setting
  - 38.3.1 Resetting the Time
Remote Management
- 39.1 Remote Management Overview
- 39.2 Remote Management
  - 39.2.1 Remote Management Setup
  - 39.2.2 Remote Management Limitations
- 39.3 Remote Management and NAT
- 39.4 System Timeout
IP Policy Routing
- 40.1 IP Policy Routing Overview
- 40.2 Benefits of IP Policy Routing
- 40.3 Routing Policy
- 40.4 IP Routing Policy Setup
- 40.5 Applying an IP Policy
  - 40.5.1 Ethernet IP Policies
- 40.6 IP Policy Routing Example
Call Scheduling
- 41.1 Introduction
VPN/IPSec Setup
- 42.1 VPN/IPSec Overview
- 42.2 IPSec Summary Screen
- 42.3 IPSec Setup
- 42.4 IKE Setup
- 42.5 Manual Setup
  - 42.5.1 Active Protocol
  - 42.5.2 Security Parameter Index (SPI)
SA Monitor
- 43.1 SA Monitor Overview
- 43.2 Using SA Monitor
Troubleshooting
- 44.1 Problems Starting Up the Prestige
- 44.2 Problems with the LAN LED
- 44.3 Problems with the DSL LED
- 44.4 Problems with the LAN Interface
- 44.5 Problems with the WAN Interface
- 44.6 Problems with Internet Access
- 44.7 Problems with the Password
- 44.8 Problems with the Web Configurator
- 44.9 Problems with Remote Management
- 44.10 Telephone Problems
Hardware Specifications
Setting up Your Computer’s IP Address
IP Subnetting
PPPoE
Wireless LAN and IEEE 802.11
Wireless LAN With IEEE 802.1x
Types of EAP Authentication
Triangle Route
Internal SPTGEN
Command Interpreter
Firewall Commands
Boot Commands
Log Descriptions
Index
- Numerics
- A
- B
- C
- D
- E
- F
- G
- H
- I
- J
- K
- L
- M
- N
- O
- P
- Q
- R
- S
- T
- U
- V
- W
- X
- Z