Zebra Technologies XiII-Series - Manual (Page 83)

Options
NOTE: Your printer may not have all of the options described in this
chapter. Call your sales representative for more information about
these options.
Rewind Option
Your Zebra XiII-Series printer may be equipped with the optional Media
Rewind capability required for Rewind and Peel-Off modes of operation.
In Rewind Mode, both labels and backing material rewind internally onto a
3-inch core. A Rewind Bracket guides the media back to the Rewind Spin-
dle after printing.
In Peel-off Mode, only the backing rewinds onto the Rewind Spindle. The
Peel/Tear Bar separates the label from the backing and the Label Available
Sensor activates to allow the operator to remove a printed label before sub-
sequent labels print. Select either the Rewind or Peel-off Print Mode from
the front panel display.
Cutter
Your Zebra XiII printer may be equipped with a cutter used to cut the labels
after they are printed. The Cutter Option may be installed concurrently with
other options including the Rewind Option. The Cutter Option may be
factory-installed or it may be installed in the field by a qualified service
technician.
The Cutter Option must be enabled by entering the Programming Mode and
using the front panel display to select the Cutter Print Mode. Refer to the
“Operation” section for additional information. The Cutter Catch Tray may
be installed to collect labels, tickets, or tags after being cut.
Zebra
XiII-Series User’s Guide
71
83
H:...Xi2UsersGuideR2.vp
Fri Aug 07 10:36:57 1998
Color profile: Disabled
Composite Default screen