Zebra Technologies XiII-Series - Manual (Page 68)

Adjustments
Toggle Positioning
Both toggles should be positioned so that they provide even pressure on the
media. The toggles are positioned by sliding them to the desired location.
On media too narrow to accommodate both toggles, position one toggle
over the center of the media and decrease the pressure on the unused toggle.
NOTE: Make sure that the toggle pressure is even across the width of the
media, otherwise the media and/or ribbon may drift.
56 Zebra XiII-Series User’s Guide
ADJUSTING
NUTS
LABEL
AVAILABLE
SENSORS
Figure 14. Toggle Adjustment
68
H:...Xi2UsersGuideR2.vp
Fri Aug 07 10:36:19 1998
Color profile: Disabled
Composite Default screen