Zebra Technologies XiII-Series - Manual (Page 38)

Front Panel Lights
NOTE: If two operating conditions occur simultaneously, one which
causes a light to be on constantly and one which causes the same
light to flash, the light will flash.
Table 2. Front Panel Lights
Light Status Indication
Power Off Printer is off or power is not applied.
On Printer is on.
Take Label Off Normal operation.
Flashing
(Peel-Off Mode Only) Label is available. Printing is paused until
the label is removed.
Error
Off Normal operation—no printer errors.
Flashing
Printer error exists. Check the display screen for more
information.
Check
Ribbon
Off Normal operation—ribbon (if used) is properly loaded.
On
Printing is paused, the front panel displays a warning message,
and the Pause light is on.
• If the printer is in Direct Thermal mode: Ribbon is loaded.
• If the printer is in Thermal Transfer mode: No ribbon is
loaded.
Paper Out
Off Normal operation—media is properly loaded.
On
No media is under the media sensor. Printing is paused, the
display shows an error message, and the Pause light is on.
Pause
Off Normal operation.
On
Printer has stopped all printing operations. Either the Pause key
was pressed, a pause command was included in the label
format, the on-line verifier detected an error, or a printer error
was detected. Refer to the display screen for more information.
Data
Off Normal operation, no data being received or processed.
On
Data processing or printing is taking place. No data is being
received.
Flashing
Printer is receiving data from the host computer. Flashing slows
when the printer cannot accept more data, but returns to normal
once data is again being received.
26 Zebra XiII-Series User’s Guide
38
H:...Xi2UsersGuideR2.vp
Fri Aug 07 10:35:48 1998
Color profile: Disabled
Composite Default screen