Zebra Technologies XiII-Series - Manual (Page 53)

Press Display Shows Action/Explanation
DELIMITER
CHAR
Delimiter Character Press the left oval key to move to the
next digit position, press the right oval key to increase the
value of the digit.
Default: 2C (comma)
Range: 00 - FF
The Delimiter character is a 2-digit hex value used as a
parameter place marker in ZPL/ZPL II format instructions.
Refer to the ZPL II Programming Guide for more information.
Selecting ZPL Mode
ZPL MODE
Selecting ZPL Mode Press the right or left oval key to
display other choices.
Default: ZPL II Selections: ZPL II, ZPL
The printer will remain in the selected mode until it is changed by
this front panel instruction or by using a ZPL/ZPL II command.
The printer accepts label formats written in either ZPL or ZPL II .
This eliminates the need to rewrite any ZPL formats you already
have. Refer to the ZPL II Programming Guide for more
information on the differences between ZPL and ZPL II .
Power-Up and Head Close Parameters
MEDIA POWER
UP
Media Power-Up Press the right or left oval key to display
other choices.
Default: Feed
Selections: Feed, Calibration, Length, and No
Motion
This parameter establishes the action of the media when the
printer is turned on.
• Calibration—recalibrates the media and ribbon sensors
• Feed—feeds the label to the first web
• Length—determines the length of the label
• No Motion—media does not move
HEAD CLOSE
Head Close Press the right or left oval key to display other
choices.
Default: Feed
Selections: Feed, Calibration, Length, No
Motion
Determines the action of the media after the printhead has
been opened and then closed.
• Calibration—recalibrates the media and ribbon sensors
• Feed—feeds the label to the first web
• Length—determines the length of the label
• No Motion—media does not move
Zebra XiII-Series User’s Guide 41
53
H:...Xi2UsersGuideR2.vp
Fri Aug 07 10:35:50 1998
Color profile: Disabled
Composite Default screen