Zebra Technologies XiII-Series - Manual (Page 54)

Label Positioning Parameters
Press Display Shows Action/Explanation
BACKFEED
Backfeed Sequence Press the right or left oval key to
display other choices.
Default: Default (“Default” is defined as 90%)
Selections: Default, after, before, 10%, 20%, 30%, 40%, 50%,
60%, 70%, 80%
This parameter establishes when and how much label
backfeed occurs after a label is removed or cut in the Peel-Off,
Cutter, and Applicator modes. It has no effect in Rewind or
Tear-Off Modes. This parameter setting can be superseded by
the ~JS instruction when received as part of a label format.
(Refer to the ZPL II Programming Guide.)
NOTE: The difference between the value entered and 100%
establishes how much backfeed occurs before the next label
is printed. For example, a value of 40 means that 40% of the
backfeed takes place after the label is removed or cut. The
remaining 60% takes place before the next label is printed. A
value of “before” means that all backfeed will take place
before the next label is printed.
LABEL TOP
Adjusting Label Top Position Press the right oval key to
increase the value, press the left oval key to decrease the
value. The displayed value represents dots.
Default: +0
Range: -120 to +120 dot rows
The Label Top Position adjusts the print position vertically on
the label. Positive numbers adjust the label top position
further down the label (away from the printhead), negative
numbers adjust the position up the label (toward the
printhead).
LEFT POSITION
Adjusting Left Position Press the left oval key to move to the
next position, press the right oval key to change between +
and - and to increase the value of the digit. The displayed
value represents dots.
Default: 0000
Range: -9999 to +9999
NOTE: For a negative value, enter the value before changing
to the minus sign.
This parameter establishes how far from the left edge of a
label the format will begin to print by adjusting horizontal
positioning on the label. Positive numbers adjust the printing
to the left by the number of dots selected, negative numbers
shift printing to the right.
42 Zebra XiII-Series User’s Guide
54
H:...Xi2UsersGuideR2.vp
Fri Aug 07 10:35:51 1998
Color profile: Disabled
Composite Default screen