Zebra Technologies XiII-Series - Manual (Page 35)

Operator Controls
This section discusses the functions of the various controls and indicators
on the XiII printer. The operator should become familiar with each of these
functions.
Power Switch
This switch is located on the back of the printer above the Power Cord and
Fuse. The Power Switch should be turned off before connecting or discon-
necting any cables.
Turning the switch on activates the printer and causes it to perform a
Power-On Self Test as it begins operation. Turning the printer power on
while holding down certain front panel keys will launch additional Printer
Self Tests following the Power-On Self Test.
External influences such as lightning storms or unwanted noise on the
power or data cables may cause erratic printer behavior. Turning the
printer’s power off and back on may re-establish proper printer operation.
Zebra XiII-Series User’s Guide 23
35
H:...Xi2UsersGuideR2.vp
Fri Aug 07 10:35:45 1998
Color profile: Disabled
Composite Default screen